Happy New Year!

Happy New Year everybody! 2012 is here and it’s going to be a good one!

Just a few quick updates for this post…

First things first, sorry for the extreme lack of updates, the MKV front is getting a little older and a little quieter. That’s alright though, the MKV generation of cars has been holding up pretty well. The FSI follower problem has been troublesome for a lucky few and there are various small sensor/peripheral problems (thrust sensor, low pressure fuel pump, pcv and diverter valves etc.)  that owners have had to deal with but overall, the cars have been robust. Maintenance just needs to be kept up to date. I recently rolled past 108,000 miles and the car runs great.

Still coming for the month of January:

The recently mentioned aftermarket cam follower is still awaiting final finishing but the company states that it should be released as soon as this month. This follower is supposed to provide 3x the life of the OEM follower by using a different surface treatment (hard chroming). If the product lives up to its promises, FSI owners can rest just a little bit easier about their cam follower issues.

The Koni Yellow Dampers are holding up well and I think I finally got the rebound settings perfect for the stock springs. When you have adjustable dampers, it’s almost impossible to just pick a setting and not fiddle with them. They tempt you at every corner. I’ll do a write up with the settings soon.

Windshield Wiper Replacements

With winter well on its way, you might find that your wiper blades are not working as well as they should be. ECS Tuning actually has one of the cheaper prices around including the shipping. Here’s a link to the OEM replacement set for the front window: OEM Front Wiper Blades. The rear blades are available as well here: OEM Rear Wiper Blade.

The original wipers on this car are actually very good and lasted about five years in the mild California climate. My previous car ran through them at a rate of one set per year. They might not fair as well in an area that sees actual winter. Here’s an interesting fact about the wipers in case you haven’t heard of it; when you remove the key from the ignition, the (front) wipers will move a little to flip the wiper blade position and prevent them from deforming. This helps the wipers last a little longer.

Sorry, I can’t find the actual part numbers for the front wiper blades, so if anyone has them, I’d appreciate them! The rear blade can be found under part number 6Q6955425A.

* You may also be able to find cheaper deals on Amazon.com. Just navigate over to the automotive department and use the “Part Finder” link near the top left. I have tried the Valeo brand rear wiper and it looks and performs like OEM. They might have the front wiper set for a few dollars cheaper than ECS.

PCV Valve and Intake Manifold Motor Warranty Extension

06F129101P Front Detail

I recently received a letter from Volkswagen of America stating that the warranty for the pcv valve and intake manifold motor has been extended to 10 years/120,000 miles. You will also be eligible for reimbursement if you paid for repairs on any of these parts. Signs of pcv failure may include loss of boost pressure, poor idling and sometimes oil being pushed out of the oil cap. Intake manifold failure usually results in poor cold starting and sluggish low end performance. Either case can also cause the check engine light to come on.

PCV Valve

Here a Golfmkv.com link to common 2.0T FSI issues.

I’ll upload the document as soon as I can scan it in. Here we go.

20120113-090344.jpg

20120113-090355.jpg

November – Quick Update

Sorry it’s been so long since I’ve written a post, things have been a little quiet on the MKV front. My car is in a place where I like everything on it so I’ve been leaving it alone. The platform is getting older but that doesn’t mean new things aren’t being developed! There are a few particular developments that I want to talk about regarding fueling and cam follower improvements. One company has decided to research and produce a replacement follower that should all but eliminate excessive wear from this part. It has not been released yet but is due to show up in December. I’ll have more information as it becomes available.

Steve Jobs – 1955-2011

Earlier today, Steve Jobs passed away, marking the end of a lifetime of incredible achievements. His enthusiasm and drive for perfection was infectious. I cannot help but feel a profound sadness for the loss of someone whose technological innovations had such a great effect on my life and many others around the world. My deepest condolences to the Jobs family and friends.

Written on WordPress for iOS 😉

-Thank you Steve Jobs, you will be missed.

Koni Sports (Yellow) Damper Update

Per Tire Rack’s experience, the Koni Yellows feel like they have broken in some. My set has almost a month and a half of daily driven time now. Koni states that there is no break-in period but it certainly feels like the dampers have gotten smoother in their operation. After a month and a half of driving on them, they are absolutely great. Smooth body control and excellent ride quality.

I have now settled on 1/2 turn of adjustment on both front and rear dampers. They are just about perfectly dialed in for the type of roads that I see in L.A. I’ll save the discussion about rebound adjustment for an upcoming post.

2.0T FSI Air Filter – Mann Filter OE Equivalent

Mann Filter - Part Number C41 110

I’ve done a few maintenance items the last few days. The fuel filter was one and now the air filter. Mann Filters has an OEM equivalent filter for the 2.0T FSI motor with the part number C41 110. I purchased it from Amazon. Mann most likely makes the original filter but the aftermarket Mann filter has a very slightly different look from the OEM filter. The foam is slightly lighter in color and softer but thicker in overall dimension. The filter material looks the same. It fits perfectly fine in the airbox. Anyway, it was around 15 dollars from Amazon, about 5 dollars cheaper than my local dealership.

Mann Air Filter - C41 110 - Edge Detail

Mann Filter - C41 110